Methods For Repairing Home Foundations

There are four major methods that you can use to repair the foundations of a home and each one has its own benefits and disadvantages when it comes to the foundation repair Houston.

Bell Bottom Pier Method: this is a foundation repair that has been researched thoroughly and is the best that can be found at the market right now.  It is a pier design that it is reinforced by the steel rebar and it is the same conceptual design which is used in construction of the multi-story buildings, highway overpasses and bridges. It can be used in any situation regardless of the moisture content and the soil and it can help the foundation cope well in different situations.

Pressed Piling Method is by now the most common method that it is used for foundation repair. It is cheap and fast and it is profitable for a Houston foundation repairer. They can be installed almost anywhere, but they are most popular in places with clay rich and soft soil. The pressed pilings have to be compressed in different series of precast concrete cylinders and they are installed through digging holes under the house. The weight of the home is used as a driving force behind the piling. Such methods have two problems: the cylinders may not be secured together; or the concrete slap may be damaged, because of the driving force behind it.  Because the cylinders cannot be secured, it is hard for them to resist horizontal movement and they may be pushed into the soil at an incorrect angle or the pilings may crack but may not be noticed in the installation. Since the slab has to be used like a driving process, there is no way that the repairer will know how far it will reach while being pushed into the soil.

Pressed piling with inserts method: The pressed method as a foundation repair was found to have too many problems and people who wanted to use them had to fix its drawbacks first before they could continue to use it. This is how they decided to use the pressed piling inserts method as an alternative. The last method is loosely based on the previous method, but there were some minor changes that took place since the concrete cylinders have to be reinforced in different ways to be able to stabilize.

Steel piling method for foundation repairs Houston TX: The steel piling method is the same as concrete pilling, but tries to utilize the strength of the steel in order to overcome weaknesses that arise with the concrete method. This method is common in places where the soil may be sandy or dryer with harder strata between the layers and this normally a refusal point.  Normally, the steel pilings are the same as other two methods but it has its difference. They should reach deeper down before they reach the refusal ground and this is an advantage in the places that are dryer. Contrary to pier and beam foundation repair, thinner pilings do not have that much ability of resisting the force when it comes to shifting of the soil.